Remote Telemetry Units
Remote Telemetry Units (RTUs) are rugged industrial computers that provide intelligence in the field and allows the central SCADA master to communicate with the field instruments. It is a stand alone data acquisition and control unit. It's function is to control process equipment at the remote site, acquire data from the equipment, and transfer the data back to the central SCADA system. It is used where the equipment being controlled is more remote from the Central Unit. CSI RTUs are assembled from the highest quality components.
We provide the following RTUs:RTU101
- Rabbit 3000 processor running @ 29.4 mhz
- 4 digital inputs with LED indicators(contact closure type)
- 2 Isolated digital outputs
- Two 4-20 ma analog Inputs
- Two isolated 4-20 ma outputs
- Two RS232 serial ports
- Serial port TX and RX LED's
- Dedicated programming/diagnostics port
- Standard communication protocols available
- +12v dc powered
- Power-on status LED
- Four status LED's for various diagnostics
- Custom Programmable in "C"
- 512K flash and SRAM
- 10/100 Base-T ethernet option
- Real-Time clock with Day Light Savings Support
- Quick-connect plugs
- Backplate mounting
RTU103A
- Rabbit 3000 processor running @ 29.4 mhz
- 20 digital inputs with LED indicators(contact closure type)
- 12 Isolated digital outputs
- Up to twelve 4-20 ma analog Inputs, 8 standard.
- Up to four isolated 4-20 ma outputs, 2 standard
- Four RS232 serial ports
- Serial port TX and RX LED's
- Dedicated programming port
- Standard communication protocols available
- 1-wire communication option
- +12v dc powered
- Power-on status LED
- Four status LED's for various diagnostics
- Custom Programmable in "C"
- 512K flash and SRAM
- 10/100 Base-T ethernet option
- Real-Time clock with Day Light Savings Support
- Quick-connect plugs
- Backplate mounting
RTU104A
- Rabbit 3000 processor running @ 29.4 mhz
- Eight digital inputs with LED Indicators
- Six form-C relay outputs with LED indicators
- Four 4-20 ma Analog Inputs
- Up to four Isolated 4-20 ma outputs
- Two status LED's
- Two RS232 serial ports
- Serial port TX and RX LED's
- Battery-backed real-Time clock
- 512K flash and SRAM
- 1-Wire communication option
- 10/100 base-T ethernet option
- Power-on status LED
- Two status LED's for various diagnostics
- Real-Time clock with Day Light Savings support
- Quick-connect plugs
- Compatible with Telephone Modems and Radio Modems
- +12v dc Powered
Input/Output Modules
We have the following input/output modules for RTU103A,RTU104A bordes
- Analog Inputs
- Analog Outputs