SCADA Communications are required when direct/wired communications to the remote sites are prohibitively expensive or it is too time consuming to construct wireline communications. CSI manufactures a complete line of products for all your Wireless SCADA needs. CSI has a significant experience in different communication media for local and distributed systems such as, telephone line, radio communications, and/or cellular telephone. Every media has its special advantages and CSI will only use and recommend well-proven products for the best results.

We offer wide range of communication services including Leased Line, Land Line, SMS, VHF Radio, and Microwave Systems.

CSI manufactures a complete line of products for all your telephone communications needs.

Serial Modem

• Snap-Track Rail Mounting
• +12v dc Power Required
• 14.4k Max BaudRate
• Complies with FCC part68
• Speaker with volume control
• 9-PIN RS232 Port
• TelePhone Line Jack
• Size:7.125"x1.1875"

Cellular Telephone Communications

CSI Provides Cellular based SCADA Systems that function in much the same way as radio based systems. With Cellular systems the front end cost is less and a monthly fee is charged.

CSI monthly fees is 20% to 50% less than our competietors.

CSI front end cost is 20% to 50% less than our competietors.

Cellular Systems are recommended for Sewage Pump Station monitoring while Radio Systems are recommended for Water Treatment Plants.

Radio Communications

Radio are the main choices to get data from Point A to Point B. Radio Technologies have progressed to a point where they are easy to install, easy to use and affordable.
The T-96SR Wireless modem provides a high speed refarming compliant data link suitable for a wide variety of applications with system security of diagnostics reporting. The T-96SR supports the Dataradio Inter-operability Standard (DI-OS) to provide compatibility with the T-96S, Rnet^TMTMand 9600S, and the Dataradio T-Modem. If your application requires a base station or repeater configuration, the T-96SR is designed to work with the T-Base base station/repeater. The T-96SR is available in UHF, VHF, and 900MHz bands.

Designed for speed and efficiency, the T-96SR provides over the air rates of 19200, 9600, or 4800 bps in a 25KHZ Channel and 9600 or 4800 bps in a 12.5KHZ channel. Selectable operating modes provide flexibility: RS-232 compatible, simplex or half-duplex operation, RTS-CTS handshake protocol with the option for configuring any two units as a digital repeater. Transparent, asynchronous serial data formats like Modbus ^TM, Modbus-RTU^TM, DNP 3.0^TM, AB DF1^TM are supported along with various other protocol formats.

Front panel LEDs provide visual indication of transmit, receive, and power. Easy-to-Use Windows based field programming software provides T-96SR's programming and diagnostics interface. Programming Software setup provides a unique programming ID that allows diagnostic reporting both locally and over-the-air from any location. Real-time, non-intrusive online diagnostics report, received signal strength (RSSI), RF power output, supply voltage, and other radio performance statistics.

The T-96SR provides an economical solution for data transmission over a VHF frequency with out the necessity of expensive options. Dataradio products are covered by a standard two-year warranty.

2 Signal DC (Legacy Product)

• 120 VAC Powered
• Low Power usage: 3.6 Watts
• Max. Short circuit current: 18ma
• Solid State Construction
• Can be operated as a stand alone unit or in pairs for two-way communication
• Simple wiring and operation
• Two-wire operation
• Dry-Contact Relay Output
• BackPlate Mountedg

4 Signal Tone (Legacy Product)

• Voice Grade,Leased Line Operation
• Full Duplex Operation
• Bell 103 Compatible
• Four(4) Dry contact Inputs
• Inputs are Optically Isolated
• Four (4) dry contact relay outputs
• I/O LED Status Indicators
• Contact Closure On Loss of Communication or PowerFailure
• Built-In Surge Protection
• Back-Plate Mounting
• 115/120 VAC @50/60 Hz Power