CSI manufactures a complete line of products for all your SCADA equipment needs.

We provide two main types of SCADA equipment:

• Duplex Controller
• Central Telemetry Unit (CTU)

Duplex Controller

• Man-Off-Auto Selector Switches
• Motor Lead/Lag Selector Switch
• Pilot Lights for Running, Failure, Seal Failure, High/Low Level, and Auxillary Alarm
• Pilot Lights for each Level Input
• Common Alarm Light With Dim Glow
• Common Alarm Dry Contact Output
• Automatic Motor Alternation
• 12v dc optically Isolated Inputs with max Current of 15ma dc
• Lag Motor Start if Lead Fails
• Adjustable Motor Failure Delay
• Adjustable Seal Failure Delay
• Telemetry Outputs are Optically Isolated
• Open-Collector Transistor Type
• Optional Float Test / Improper Sequence

Central Telemetry Unit (CTU)

• 32-bit 386 33Mhz Processor
• 2M byte Flash Memory
• Extended Temperature Range: -40°C to 80°C
• 2500 Volt Isolated I/O
• Up to 6 High-Speed Serial Ports RS 232 and RS 485 Compatible
• Up to 64 Analog and Digital Points
• 2400 Baud Telephone Modem
• Power: 10-30v dc
• Natural Voice Alarm and Reporting
• Touch-tone Telephone Control
• Modem Speeds to 33.6 Kbaud for Telephone, Cellular Phone or Radio